(포스터발표리스트)
순 번 | 제 목 | 저 자 | 소 속 |
PS-01 | Development and characterization of cryogenic urethane adhesive for LH2 Carrier tanks | 김두헌․권하은․전호균․김광현*․전규진*․김구니 | 한국소재융합연구원, *HD한국조선해양 |
PS-02 | Enhanced interfacial adhesion via chemical and physical engineering in all-soft vertical organic photodetectors | 박해찬․김다은․심교승† | 울산과학기술원 화학과 |
PS-03 | Impact property changes of protective adhesive film by hollow particles | Sepideh RANJI and Myung Cheon LEE* | Department of Chemical Engineering, Dongguk University |
PS-04 | 투명열전도 점착조성물의 열적 기계적 특성 | 최아영1 , 2박성엽, 오원태1,2* | (1)동의대학교 고분자나노공학과, (2)파인머트리얼즈㈜ |
PS-05 | A Simple Strategy to Modulate the Adhesive Properties of Water-based Acrylic Pressure-sensitive Adhesives | Pei Qin, Sepideh Ranji, Myungcheon Lee | Department of Chemical Engineering, Dongguk University |
PS-06 | Bio-inspired chitosan/polyvinyl alcohol/tannic acid hydrogels as wood adhesives | Hyun Ho Shin1, Haejin Bae2, Ji Hyun Ryu1,2† | (1)화학공학과, 원광대, (2)Ecological Technology Research Team, National Institute of Ecology, (3)탄소융합공학과 |
PS-07 | Evaluation of Adhesion and Mechanical Properties of Urethane Acrylic Polymer Binders Using Crosslinking Catalysts | 이주홍․임원빈, 민진규, 이재룡, 이승현, 배지홍․허필호 | 부산대학교 고분자공학과 |
PS-08 | Chlorinated Polyolefin(CPO)-g-Β-Carboxyethyl acrylate(Β-CEA)의 합성 및 이를 이용한 접착특성 연구 | 정부영, 천제환† | 한국소재융합연구원 |
PS-09 | Characteristics of room temperature curing acrylate binders for road markings using acrylic silane crosslinkers | 이재룡․임원빈․민진규․이주홍․이근호․봉하송․ 변상욱․배지홍․허필호 | 부산대학교 고분자공학과 |
PS-10 | 셀룰로오스계 기반 소재용 표면 코팅제의 내수 및 내유 특성 향상에 관한 연구 | 박현주†․박재형․이지은 | 한국소재융합연구원 |
PS-11 | 재생 폴리에스테르계 부직포용 친환경 함침용 수지 제조 및 특성에 관한 연구 | 박현주†*․박재형*․김창겸** | *한국소재융합연구원 융합소재연구단, **(주)대진에스앤티 |
PS-12 | The Influence of Graphene on the Physical Properties of FKM Rubber | 김진곤․ 오정석† | Department of Materials Engineering and Convergence Technology, RIGET, 경상국립대 |
PS-13 | Synthesis of Waterborne Polyurethane Acrylates for VOC Reductionand Development of Fluorescent Pigment Resin Compositions | 김다예․이나경․이승구 | 울산대학교 화학과 |
PS-14 | Flexible Composite Substrate for Enhancing Organic Field-Effect Transistor Stability Under Mechanical Deformation | 김유민, 이화성,† | 한양대학교 ERICA; 한양대학교 |
PS-15 | Direct-Ink-Written MXene and PEDOT Micro-Supercapacitors for Improved Flexibility and Performance | 김유진․이승구 | 울산대학교 화학과 |
PS-16 | Fabrication and Characterization of Advanced Piezoelectric Pressure Sensors Using Electrospinning ZnO Composite Nanofibers | 오수현, 이화성* | 한양대학교 재료화학공학과 |
PS-17 | Advanced Flexible Physical Sensors with Independent Detection Mechanisms of Pressure and Strain Stimuli for Overcoming Signal Interference | Dashdendev Tsogbayar1,2, Hwa Sung Lee1,2 | (1)Department of Materials Science and Chemical Engineering, 한양대 (2)BK21 FOUR ERICA-ACE Center, 한양대 |
PS-18 | Electrochemical organic diodes with all-soft components for wearable electronics | 김세현 ․신동형․심교승† | 울산과학기술원 화학과 |
PS-19 | Fabrication of Large-Area Transparent Thin Film Based on Aramid Solution with Extremely High Viscosity | 류연해.유승건*.김유리.성예린.김영진.임재민. 정유정.Vanessa.,최현호† | 경상국립대학교 나노신소재융합공학과, 한국전기연구원 |
PS-20 | Robust and flexible fiber-like multifunctional sensor for use as smart textiles | 서정윤․이화성 | 한양대학교 재료화학공학과 |
PS-21 | Synthesis of New Polyimide Insulators with Strong Intermolecular Interaction and Their Application into Organic Electronics | Yerin Sung, Youngjin Kim, Yuri Kim, Yeonhae Ryu, Vanessa, Yujeong Jeong, Jaemin Im, Hyun Ho Choi1 | Department of Materials Engineering and Convergence Technology, 경상국립대 |
PS-22 | Hydrovoltaic devices based on graphene-oxide | 정지훈․한다연․정인우* | 경북대학교 응용화학공학부 |
PS-23 | Relationship between microphase separation and thermo-mechanical properties of self-healable PDMS-crosslinked acrylate copolymers | 한경록․이향무․정인우* | 경북대학교 응용화학공학부 |
PS-24 | Reinforced rigid polyurethane foams (RPUF) enhanced mechanical properties and insulating properties using surface-modified nanofillers | 박경준․한경록․정인우* | 경북대학교 응용화학공학부 |
PS-25 | 전기자동차 부품용 복합 소재의 방열 및 기계적 특성에 관한 연구 | 박현주†․박재형 | 한국소재융합연구원 |
PS-26 | Enhancing Interfacial Adhesion of Acrylonitrile-butadiene-styrene Composites through Basalt Fiber and Modified Lignin Additives | 김수진․이학용․장세연․신동호․명수완․이재창† | 한국화학연구원 바이오화학연구센터 |
PS-27 | Single-Step-Processed Optimization of Interfacial Characteristics in Organic Electronics by Simply Blending Organic Semiconductor and Double SAMs | 고은* ․ 오수현** ․ 이화성† | 한양대학교 재료화학공학과 |
PS-28 | PCB 기판용 아크릴 수지의 형광 발현성에 대한 연구 | 표성현, 권용민, 곽보래, 권성헌, 송민석* | 한진케미칼(주), 울산과학대학교 화학공학과* |
PS-29 | Synthesis and characterization of polyimide microparticles from 1,2-diphenylethane-1,2-diyl bis(4-aminobenzoate) and 4,4′-(Hexafluoroisopropylidene)diphthalic anhydride | Sivagangi Reddy Nagella and Chang-Sik Ha* | Department of Polymer Science and Engineering, School of Chemical Engineering, 부산대 |
PS-30 | Study on Preparation and Properties of Thermoplastic Vulcanizates based on FVMQ, PP, and TPU | 권지원․오정석* | Department of Materials Engineering and Convergence Technology, RIGET, 경상국립대 |
PS-31 | Characterization of core-shell latex containing phosphorus synthesized by emulsion polymerization | 박영은․박정완․류가연*․공호열 | 경상국립대학교 화학과, *경상국립대학교 분자제어연구소 |
PS-32 | 차세대 난연 소재: 인계 및 불소 기반 아크릴 폴리머의 합성과 특성화 | 조수현․박정완․류가연*․공호열 | 경상국립대학교 화학과, *경상국립대학교 분자제어연구소 |
PS-33 | Study on Mechanical and Thermal properties of Ultra-High Molecular Weight Polypropylene-b-Polyethylene Copolymers with Polyethylene as a filler | 정민기․Vishal Gavande․조하윤․서보길․이원기† | 부경대학교 고분자공학전공* |
PS-34 | In Vitro Generation of Functional Salivary Gland Tissue-Engineering Using Catechol-Functionalized Nanofiber Scaffoldscc | Jeong Yun Lee1, Hyun Ho Shin2, Ji Hyun Ryu1,2,† | (1)원광대 탄소융합공학과, (2)Department of Convergence Engineering, 원광대 |
PS-35 | Chitosan-gallic acid/Hyaluronic acid/Calcium Adhesive Patch for Wound Healing | 김세아, 현다한, 신현호, 류지현† | 원광대학교 탄소융합공학과 |
PS-36 | Water-Soluble Poly(ethylene oxide)/Ginsenoside Compound K Complex for Anti-Cancer Therapy | Han Sol Kim1, Ji Hyun Ryu1,2† | (1)Department of Chemical Engineering, 원광대, (2)원광대 탄소융합공학과 |
PS-37 | Study on the Characteristics of Bio-Based Adhesive Polymers as Alternatives to Petroleum-Based Polymers | 민진규, 김이천, 이재룡, 이주홍, 임원빈, 배지홍, 허필호* | 부산대학교 응용화학공학부* |
PS-38 | Bio-polyurethane adhesive reinforced with core shell rubber for improvement of mechanical properties | 이근호․임원빈, 민진규, 이주홍, 이재룡, 김성호, 배지홍, 허필호 | 부산대학교 고분자공학과 |
PS-39 | Extraction of γ-chitosan from insects and fabrication of PVA/γ-chitosan/kaolin nanofiber wound dressing using multi-needleless electrospinning system | 장세연․이학용․김수진․신동호․명수완․이재창† | 한국화학연구원 바이오화학연구센터 |
PS-40 | Production of Fermentable Sugars from Sweet Sorghum Bagasse and Enzyme Immobilization onto Degradable Polymer Nanofiber for the Purification | 주희a, 임다슬a,b, 김은비a,c, 이학용a, 이재창a, 명수완a,* | a한국화학연구원 바이오화학실용화센터, b연세대학교 화공생명공학과, c한양대학교 에너지공학과 |
PS-41 | Dismantlable Polyurethane Adhesive: Study on the Effects of Heat Trigger and Type of Thermal Expansion Bead | 임동혁, 김동호, 이진혁, 윤유미 | 한국소재융합연구원 |
PS-42 | Study of Synthesis and Curing Characteristics of Moisture-Resistance Coating Agents Based on Reactive Silicon | Donghyeok Im†, Dongho Kim | 한국소재융합연구원 |
PS-43 | Property and Interface of graphene fluoride and MXene-based aramid nanofiber thermoconductive films with electromagnetic interference shielding effectiveness | 김준범, 김성룡* | 한국교통대학교 나노화학소재공학과 |
PS-44 | Scalable Roll-to-Roll Fabrication of Large-Area Perovskite Solar Cells via Advanced Radiation Annealing | 박건영1,2, 김민재1,3, 오준영1, 김회민3, 강보석3, 조성근1, 최우진1, 김민2,김동석1 | 1, 한국화학연구원 2. 전북대학교 3. 성균관대학교 |